No. 
Theses Titles 
Level 
Student Name 
Present Date 
1 
Investigation of flow and heat transfer between two concentric cylinder with constant magnetic field 


00000000 
2 
Numerical modelling of steel solidification in a threedimensional mold. 


00000000 
3 
Numerical analysis of thermal conductivity of charring material ablation with considering chemical reaction, mass transfer and surface heat transfer effects 


00000000 
4 
Estimation of timedependent heat flux using temperature distribution at a point 


00000000 
5 
Stagnationpoint flow and Heat Transfer of a Viscous, Compressible fluid on a Cylinder with Constant Heat Flux 


00000000 
6 
ESTIMATION OF THE STRENGTH OF THE TimeDependent Heat Source Using Temprature Distribution at a Point In a Three Layer System 


00000000 
7 
Stagnationpoint flow and heat transfer of a compressible fluid on a flat plate moving vertically toward the flow 


00000000 
8 
Stagnationpoint flow and heat transfer of a compressible fluid on a rotating cylinder 


00000000 
9 
Investigation of threedimensional axisymmetric unsteady stagnationpoint flow and heat transfer impinging on an accelerated flat plate 


00000000 
10 
Three Dimensional Flow and Heat Transfer in an Eccentric Annulus Between Two Cylinders Rotating with a Function of Time 


00000000 
11 
INVESTIGATION OF THREEDIMENSIONAL AXISYMMETRIC UNSTEADY STAGNATIONPOINT FLOW AND HEAT TRANSFER IMPINGING ON AN ACCELERATED FLAT PLATE 


00000000 
12 
UNSTEADY THREEDIMENSIONAL STAGNATION FLOW AND HEAT TRANSFER OF A VISCOUS, COMPRESSIBLE FLUID ON AN ACCELERATED FLAT PLATE 


00000000 
13 
Flow between two parallel plates with variable boundary conditions 


00000000 
14 
THREEDIMENSIONAL UNSTEADY STAGNATIONPOINT FLOW AND HEAT TRANSFER IMPINGING OBLIQUELY ON A FLAT PLATE WITH TRANSPIRATION 


00000000 
15 
Homotopy Simulation of MicroScale Flow Between Rotating Disks 


00000000 
16 
MHD ThreeDimensional Stretched NanoFluid Flow With Velocity Slip And Convective Surface Boundary Conditions 


00000000 
17 
MHD Boundary Layer and Heat Transfer of a NonNewtonian Nano Fluid Over a Sheet with Transpiration 


00000000 
18 
UNAXISYMMETRIC STAGNATIONPOINT FLOW AND HEAT TRANSFER OF A VISCOUS FLUID ON A ROTATING CYLINDER WITH TIMEDEPENDENT ANGULAR VELOCITY 


00000000 
19 
Effects of thermophoresis and Brownian motion on nanofluid heat transfer and entropy generation 


00000000 
20 
Effect of vortex generators position on heat transfer and homogeneity of nanofluid: 


00000000 
21 
Numerical investigation of effective parameters on combined heat transfer performance in a solar cavity receiver 


00000000 
22 
Exact Solution of Entropy Generation for MHD Nanofluid Flow Induced by a Stretching /Shrinking Sheet with Transpiration: Dual Solution 


00000000 
23 
Numerical solution of NavierStokes equtions in stagnationpoint flow on a cylinder with mixed convection 


00000000 
24 
Analytical Solution for Flow and Heat Transfer of a Modified Second Grade Fluid over a Porous Plate 


00000000 
25 
Mixed Convection Stagnation Point Flow of a NonNewtonian Nanofluid over a Vertical plate 


00000000 
26 
Heat transfer enhancement in a triplex tube heat exchanger based on PCM solidification 


00000000 
27 
Investigation of effect of constant MHD on twodimensional flow and heat transfer in a porous media between two rotating cylinder 


00000000 
28 
Exact solution of the problem of a nanofluid between two vertical cylinder moving with a constant velocity 


00000000 
29 
Use of conjugate gradient method in solving inverse heat conduction problem concerning calculation of time dependent heat flux 
Ph.D 
mohammadiun, mohammad 
20100906 
30 
Flow and heat transfer between two rotating cylinders with timedependent angular velocity two and three dimensional 
Ph.D 
abedini, ahad 
20100906 
31 
Axisymmetric Stagnation—Point Flow and Heat Transfer of a Viscous Fluid on a moving Plate with TimeDependent Axial Velocity and Uniform Transpiration 
M.Sc. 
Jafari, Mohammad 
20101012 
32 
Double diffusive natural convection in a rectangular porous cavity 
M.Sc. 
saberi, ahmad 
20110228 
33 
Stagnation flow and heat transfer on cylinder with considering compressibility of fluid 
Ph.D 
mohammadiun, hamid 
20110904 
34 
Analytical solution of unsteady Couette flow with varying boundary conditions 
M.Sc. 
salamat bilondi, masoud 
20120423 
35 
حل تشابهی جریان سکون مورب سه بعدی غیر متقارن ناپای سیال لزج و انتقال حرارت روی صفحه تخت همراه با مکش و دمش 
M.Sc. 
Haddad Sabzevar, Mohammad Hadi 
20120521 
36 
Unsteady Couette flow of a dusty fluid between two infinite horizontal plates 
M.Sc. 
Zabihi, Seyed Javad 
20120521 
37 
Steady and Unsteady Stagnation Flow and Heat Transfer of a Viscous, Compressible Fluid on a Flat Plate 
Ph.D 
Mozayeni, Hamidreza 
20120530 
38 
effect of radialy varying magnetic field on flow and heat transfer between two rotating cylinders 
M.Sc. 
Esfandiari, hamed 
20120915 
39 
Study of fluid flow and heat transfer inside enclosures at singlephase condition 
M.Sc. 
beyhaghi, mahmoud 
20130603 
40 
Investigate the effects of fluid viscosity on the rate of erosion of singlebubble cavitation 
M.Sc. 
Rezazadeh Hamedani, Amir 
20131216 
41 
Thermal diffusivity and heat conduction of materials using the laser flash method and inverse algorithm 
M.Sc. 
ay, leila sadat 
20140421 
42 
Designing and Optimizing Geometry and Configuration of MidSpan Rib turbulators for Internal Cooling of Gas Turbine Blades 
M.Sc. 
Taghizadeh Naderi, Farshad 
20140421 
43 
Unaxisymmetric StagnationPoint Flow and Heat Transfer On a Cylinder with transpiration 
M.Sc. 
faramarzi, masoud 
20140505 
44 
Vaporization Modeling of Viscous, Incompressible StagnationPoint Flow on a Flat Plate 
Ph.D 
Mohaghegh, Mohammadreza 
20140519 
45 
Enhanced heat transfer for PCM melting in triplex tube heat exchanger with internal circular fins 
M.Sc. 
eslamnezhad, hamidreza 
20140526 
46 
Mixed Convention Heat Transfer from a Heated Vertical Rotating Cylinder at an Arbitrary Incident Angle Unsteady StagnationPoint Flow 
Ph.D 
Bayat, Reza 
20140621 
47 
Design of a building as a model using PCM materials for thermal optimization 
M.Sc. 
gholami gifan, hamid 
20140707 
48 
Heat Transfer Enhancement in a Triplex Tube Heat Exchanger Containing PhaseChange Material RT82 by Modifications of Length and Position of Fins 
M.Sc. 
Mohammad hosseini, Mohammad 
20140707 
49 
Gas Turbine Blade Cooling Using Flow Jet in Leading Edge 
M.Sc. 
pishbin, iman 
20141031 
50 
The analytical study of viscous incompressible fluid flow between two eccentric rotating cylinders in bipolar coordinates using a perturbation solution 
M.Sc. 
shojaee, morteza 
20141110 
51 
Homotopy Perturbation method analysis of a nonNewtonian fluid over a porous plate 
M.Sc. 
Golafshan, Bijan 
20150622 
52 
Numerical and experimental investigation of solidification of incompressible viscous stagnation flow on a constant temperature substrate 
Ph.D 
Zamani Aghaie, Alireza 
20150722 
53 
Analytical and experimental investigations of the fluid flow and heat transfer induced by rotating circular cylinders in a viscous fluid with different boundary conditions 
Ph.D 
Freidoonimehr, Navid 
20150722 
54 
Numerical analysis of the use of ozone in reducing emissions of HCCI engine using AVL Fire software 
M.Sc. 
BAGHAEE RAVARI, ALI 
20160629 
55 
Numerical analysis of the impact of ozone on increasing the power and efficiency of the HCCI motors by using AVL Fire 
M.Sc. 
Hosseini, Abolghassem 
20160804 
56 
Experimental and numerical simulation of the effective parameters on the efficency of an air separation unit and feasibility for small scale liquified natural gas units 
Ph.D 
Ghazikhani, Ali 
20161103 
57 
Investigation of flow and heat transfer for the liquid between two cylinder in different situations 
M.Sc. 
ibrahim, makki 
20161226 
58 
Investigation of flow and heat transfer for the air between two cylinder in different situations along with stability analysis 
M.Sc. 
MASEER, ASHRAF RAIHAN MASEER 
20161226 
59 
Experimental Investigation and Numerical Simulation of Nanofluid Flow In Twisted Channel With Indirect Path 
M.Sc. 
Feizabadi, Amir 
20170227 
60 
Enhance heat transfer for phasechange materials in triplex tube heat exchanger by optimization of rectangular fins' angles with response surface method 
M.Sc. 
khadeh, alireza 
20170424 
61 
an analytical study: Forced convection heat transfer and flow phenomena of rotating sphere at a constant speed in porous media 
M.Sc. 
Safarzade, Sajjad 
20170424 
62 
Improve the internal heat transfer boundary layer is formed again (B.L.R) by the mesh cylinder by using response surface methodology (R.S.M) 
M.Sc. 
Shoghigharamaleki, Ali 
20170529 
63 
Homotopy analysis of the natural convection of incomperssible fluid about a cone within porous medium 
M.Sc. 
akmali, behnam 
20171113 
64 
The numerical optimization of process of tile and ceramic baking in kiln of Pardis Seram Paj company 
M.Sc. 
jalalzadeh, seyed javad 
20180101 
65 
Numerical simulation of flow and heat transfer in mixed convection problem between two eccentric rotating spheres with time dependent angular velocity 
M.Sc. 
Hamad, Hussein Madhi Hamad 
20180212 
66 
numerical simulation of flow and heat transfer in mixed convection problem between two eccentric rotating spheres in nanofluid with time dependent angular velocity 
M.Sc. 
Al  Fatlawi, Muthna Mohhammed Ali 
20180212 
67 
Numerical study of the effect of variable magnetic field in the radius direction and mixed convection heat transfer around a threedimensional rotating cylinder in porous medium using BrinkmannFochheimer model 
M.Sc. 
zamaemifard, marziyeh 
20180226 
68 
Threedimensional investigation of flow and heat transfer of a compressible fluid between two rotating horizontal cylinders 
M.Sc. 
hosseini, Sayyid mostafa 
20180528 